PC Setup 3-63
4.
Click Format; a warning window informs you that formatting the disk will
erase everything on it. If you want to continue, click Proceed With Format; if
not, skip to step 5.
5.
Close your browser. Then, reboot your printer to make the change take effect.
Trays and Media (Input Trays and Media Types)
The Trays and Media option allows you to select your default input tray and media
types.
Default Input Tray
The Default Input Tray option allows you to select your default input tray.
1.
Go to the printer home page (fig. 3.133). See “Printer Home Page” earlier in
this chapter for details.
Fig. 3.133 Printer Home Page
Fig. 3.134 Input Tray Window
2.
Select Printer Configuration: Trays and Media: Input Tray (fig. 3.133). The
Input Tray window appears (fig. 3.134).
3.
Select the tray you wish to be the default tray from the drop-down menu. The
drop-down menu list will depend upon what tray options you have installed.
Then, click Change.
4.
Close your browser.
Media Types
The Media Types options allow you to configure the media types for each of your
printer’s input sources.
1.
Go to the printer home page (fig. 3.135). See “Printer Home Page” earlier in
this chapter for details.
Summary of Contents for FilmMaker 4
