Xante FilmMaker 4, User Manual

Page: 245 / 310

Options 7-1
Chapter 7 - Options
Introduction
This chapter describes available printer options and installation for those that are user
installable.
Printer Options
You can order controller board upgrades and paper handling options to enhance your
printer’s performance. The following chart lists options and their types of installation.
Option Type of Installation
2400 DPI Resolution Factory or user
Internal IDE hard disk Factory or user
NEIT Factory or user
Paper feeder User only
RAM upgrades Factory or user
Factory installable options ordered with your printer are installed before the printer is
shipped. To order options, call XANTÉ at 800-926-8839 (US and Canada) from 7:00
a.m. until 6:00 p.m. Central Standard Time Monday through Friday, or call your
XANTÉ vendor. If it is a factory upgrade, you will be given an RMA (Return Material
Authorization) number and shipping instructions.
Paper Handling Options
You can add up to two optional paper cassette feeders to your printer to increase input
capacity for standard paper to approximately 1,650 sheets.
Paper Cassette Feeder
This section describes installing and removing a paper cassette feeder. Cassette feeders
support the same paper cassettes as the printer’s built-in paper feeder. See “Standard
Cassette” in chapter 1 and “Media Sources” in chapter 5.
Installing the Paper Cassette Feeder
1. Unpack the paper cassette feeder from the shipping carton. Remove all plastic,
tape, and stabilizing material. Save the carton and packing material to use for
storing the feeder.
The package should contain the following items:
• Feeder unit • Paper Cassette with cover • 2 IOT screws (fig. 7.3)