Maintenance
Pges
3 - 38
ba43121e03
01/2011
Note
An AutoCal is triggered when the subsequent measuring procedure
starts. You cannot quit the procedure.
Tubing at the inlet of
the photometer block
Install the tubes according to the picture on the following page. Please
observe the following points:
z
Wind the tubings around the coil loosely and without stretching.
z
The openings of the tube borings are chamfered on one side so the
tubings can be wound without bending. Make sure the chamfered
openings are on the right side (see pictures). The chamfered edge
determines the winding direction.
z
If you have difficulties threading a tube end through the boring,
slightly moisten the tube on the outside.
13
At the end of the procedure,
Service finished
appears on the
display.
14
Return to the service menu with
3
.