Overview
Pges
1 - 6
ba43121e03
01/2011
1.3.2
Retrofitting TresCon Pges
This section is only relevant if the TresCon Pges module was
purchased as a retrofit kit. Two free module slots must be available at
the basic instrument for the retrofitting.
Preparatory activities
Installing TresCon Pges in an existing measuring system can require
some preparation:
z
Displacing the existing analyzer module to the right-hand mounting
slot (module 3, connection cable on the right side)
z
Selection of the permeate supply:
Setting up a separate permeate supply (with its own catch location)
or connection to an existing permeate supply (catch location with
further analyzer modules)
Note
Read the I
NSTALLATION
section in the T
ERMINAL
volume of the operating
manual before starting the retrofit!
