Pges
Operation
2 - 1
ba43121e03
01/2011
2
Operation
The following sections contain all the operating steps and tasks that are
required in connection with the Pges analyzer module. The sequence
corresponds to the menu sequence of the main menu.
After calling up most of the menu items, you can select the presentation
of data mode or change mode. In order to change a parameter, you
must enter the four-digit identification number (PIN).
Note
How to enter the PIN to change parameters is described in volume 1,
T
ERMINAL
, of this operating manual.
Note
The operating sequences are described explicitly for the
Change
mode. If you want to display the parameters, proceed to the operating
step "Selecting the change mode" of the instructions and, instead,
select the "Presentation of data" mode.
Caution
If you select the
Presentation of data
mode, the analyzer module
continues to run in the background.
If you select the
Change
mode, after the identification number has
been entered, the analyzer module goes into STOP mode as important
operating parameters could be changed.
Calling up the main
menu, Pges parameters
1
Measuring mode
Select the TresCon Pges module: Move the arrow (cursor) with
68
to the display line of the Pges analyzer module.
