Woodward SEG HighPROTEC MRA4, Device Manual

Page: 72 / 510

Smart View
Set up a Connection via Serial Interface under Windows Vista
Establishing the connection between Smart view and the device is a three step procedure.
1. Installing Smart view (the application itself)
2. Installing a (virtual) modem (that is a precondition for TCP/IP communication via a zero-modem cable)/
(to be done within the control panel).
3. Establishing a network connection between Smart view and the device
(to be done within Smart view).
1. Installlation of Smart view (the application itself).
Please see above.
2. Installation of the (virtual) modem
•
Call up the »Control Panel«
•
Choose »Hardware & Sound«
•
Choose »Phone & Modem Options«
•
Go to Tab »Modem«
•
Click on the »Add« button
•
A new window Install new modem pops up
•
Set the check box Don´t detect my modem
•
Choose» I will select from list«
•
Click on the »Next« button
•
Choose the correct COM-Port
•
Click on the »Next« button
•
Select Computer cable between two computers
•
Click on the »Properties« button
•
Go to Tab »General«
•
Click on the »Change Settings« button
•
Go to Tab »Modem«
•
Set within the Drop-Down Menu the correct baud rate = 115200
•
Click on the »OK« button
•
Click on the »OK« button
•
You have to reboot your computer now!
Page 72 EN MRA4 04/09