Woodward SEG HighPROTEC MRA4, Device Manual

Page: 221 / 510

Parameters
Password
Password Entry at the Panel
Passwords can be entered by way of the softkeys.
1 2 3 4
Example: For password (3244) press successively:
•
Softkey 3
•
Softkey 2
•
Softkey 4
•
Softkey 4
Password Changes
Passwords can be changed at the device in menu »Device Para/Password« or by means of the Smart view
software.
A password must be a user-defined combination of the numerics 1, 2, 3 and
4.
All other characters and keys won´t be accepted.
The password of operation mode »Parameter setting and planning« enables you to transfer parameters from the
Smart view software into the device.
When you want to change a password, the existing one has to be entered firstly. The new password (up to 8
digits) is then to be confirmed twice. Please proceed as follows:
•
In order to change the password please enter your old password followed by pressing the »OK«-key.
•
Afterwards enter the new password and press the »OK«-key.
•
Finally confirm your new password and press the »OK-key«.
Password Forgotten
All passwords can be reset to the fail-safe adjustment »1234« by pressing the »C« key during cold booting. For
this procedure confirm the inquiry »Shall All Passwords Be Reset?« with »Yes«.
EN MRA4 04/09 Page 221