Switchgear/Breaker – Manager
Parameter
Description
Setting range
Default
Menu path
Off Cmd26
Off Command to the Circuit Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds
-.-
[Control
/SG
/SG[1]
/Trip Manager]
Off Cmd27
Off Command to the Circuit Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds
-.-
[Control
/SG
/SG[1]
/Trip Manager]
Off Cmd28
Off Command to the Circuit Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds
-.-
[Control
/SG
/SG[1]
/Trip Manager]
Off Cmd29
Off Command to the Circuit Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds
-.-
[Control
/SG
/SG[1]
/Trip Manager]
Off Cmd30
Off Command to the Circuit Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds
-.-
[Control
/SG
/SG[1]
/Trip Manager]
Synchronism
Synchronism
1..n, In-SyncList
-.-
[Control
/SG
/SG[1]
/Synchron Switchg]
t-MaxSyncSuperv
Synchron-Run timer: Max. time allowed for
synchronizing process after a close initiate. Only used
for GENERATOR2SYSTEM working mode.
0 - 3000.00s
0.2s
[Control
/SG
/SG[1]
/Synchron Switchg]
ON incl Prot ON
The ON Command includes the ON Command issued
by the Protection module.
inactive,
active
active
[Control
/SG
/SG[1]
/General settings]
OFF incl TripCmd
The OFF Command includes the OFF Command
issued by the Protection module.
inactive,
active
active
[Control
/SG
/SG[1]
/General settings]
373
MRU4
DOK-HB-MRU4-2E
