Woodward High PROTEC MRU4, Manual

Page: 173 / 655

Communication Protocols
Parameter Description Setting range Default Menu path
t-call If there is no request telegram sent from Scada to the
device after expiry of this time - the device concludes a
communication failure within the Scada system. 1 - 3600s 10s [Device Para
/Modbus
/Communication]
Scada CmdBlo Activating (allowing)/ Deactivating (disallowing) the
blocking of the Scada Commands inactive,
active
inactive [Device Para
/Modbus
/Communication]
Disable Latching Disable Latching: If this parameter is active (true), none
of the Modbus states will be latched. That means that
trip signals wont be latched by Modbus. inactive,
active
inactive [Device Para
/Modbus
/Communication]
AllowGap If this parameter is active (True), the user can request
a set of modbus register without getting an exception,
because of invalid address in the requested array. The
invalid addresses have a special value 0xFAFA, but the
user is responsible for ignoring invalid addresses.
Attention: This special value can be valid, if address is
valid. inactive,
active
inactive [Device Para
/Modbus
/Communication]
Optical rest position Optical rest position Light off,
Light on
Light on [Device Para
/Modbus
/Communication]
Config Bin Inp1 Configurable Binary Input 1..n, Assignment
List -.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp1 Latched Configurable Binary Input inactive,
active
inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp2 Configurable Binary Input 1..n, Assignment
List -.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp2 Latched Configurable Binary Input inactive,
active
inactive [Device Para
/Modbus
/Configb Registers
/States]
173 MRU4 DOK-HB-MRU4-2E