Navigation - Operation
6
INFO Key
(Signals/Messa
ges)
Looking through the present
LED assignment. The direct
select key can be actuated at
any time. If the INFO key is
actuated again you will leave
the LED menu.
Here only the first assignments
of the LEDs will be shown.
Every three seconds the
»SOFTKEYs«
will be shown
(flashing).
Displaying the multiple
Assignments
If the INFO-Button is pressed
only the first assignments of
any LED is shown. Every three
seconds the
»SOFTKEYs«
will
be shown (flashing).
If there is more than one signal
assigned to a LED (indicated by
three dots) you can check the
state of the multiple
assignments if you proceed as
follows.
In order to show all (multiple)
assignments select a LED by
means of the
»SOFTKEYs«
»up« and
»down«
Via the »Softkey« »right« call
up a
Submenu of this LED that
gives you detailed information
on the state of all signals
assigned to this LED. An arrow
symbol points to the LED
whose assignments are
currently displayed.
Via the
»SOFTKEYs«
»up«
and
»down« you can call up the
next / previous LED.
In order to leave the LED menu
press the
»SOFTKEY«
»left«
multiple times.
7
»
C Key«
To abort changes and to ac-
knowledge messages.
In order to reset please press
the Softkey »wrench
«
and
enter the password.
66
MRU4
DOK-HB-MRU4-2E
