Wincor Nixdorf TH210, Programmer'S Manual

Page: 94 / 152

TH210 Programmer’s Guide
90
Set DataMatrix Parameters
ASCII
Hexadecimal
Decimal GS ( k pL pH cn fn m d1 d2
1D 28 6B 05 00 36 42 m d1 d2
29 40 107 5 0 54 66 m d1 d2
Values and Ranges:
Value:
Ranges:
(pL + pH x 256) 5
cn 54
fn 66
m 0, 1, 48, 49
d1, d2 (when m = 0, 48) (0, 0), (10, 10), (12, 12), (14, 14), (16, 16),
(18, 18), (20,20), (22, 22), (24, 24), (26, 26),
(32, 32), (36, 36), (40, 40), (44, 44), (48, 48),
(52, 52), (64, 64), (72, 72), (80, 80), (88, 88),
(96, 96), (104, 104), (120, 120), (132, 132),
(144, 144)
d1, d2 (when m = 1, 49) (8, 0), (8, 18), (8, 32), (12, 0), (12, 26), (12,
36), (16, 0), (16, 36), (16, 48)
Defaults:
m = 0
d1, d2 = (0, 0)
This command sets the symbol type, number of rows (d1), and number of columns (d2)
d2
Module (minimum unit of symbol) d1
m d1, d2 symbol type number of rows, columns
0, 48 (0, 0) Square (ECC200) Sets automatic processing for the
number of rows and columns of the
symbol.
0, 48 Other than
(0, 0) Square (ECC200) Sets the number of rows of the
symbol to d1, the number of
columns to d2.
1, 49 (8, 0), (12,
0), (16, 0) Rectangle (ECC200) Sets the rows of the symbol to d1,
the number of columns to
automatic processing.
1, 49 Other than
(8, 0), (12,
0), (16, 0) Rectangle (ECC200) Sets the number of rows of the
symbol to d1, the number of
columns to d2.