Wincor Nixdorf TH210, Programmer'S Manual

Page: 18 / 152

TH210 Programmer’s Guide
14
Command Description Difference between previous product and new
product emulation mode
inch and the TH210 has a fundamental step of
1/203 inch, the actual line spacing will not exactly
match the requested spacing.
1B 4A n Print and feed paper This command uses n in terms of n/360 inches.
Since the A793 had a fundamental step of 1/152
inch and the TH210 has a fundamental step of
1/203 inch, the actual line spacing will not exactly
match the requested spacing.
1B 59 n1
n2 d1...dn
Select double-
density graphics In A793 emulation mode, the printer scales the
graphics to provide the best match.
1B 5C n1
n2
Set relative print
position The parameter to this command is in units of
dots.
However, the command moves and aligns to
character positions. In A793 emulation mode, this
command calculates how many character
positions to move based on the A793 character
width in dots (10) versus the TH210 (13).
1B 61 n Select justification This command does true dot resolution
alignment for centering versus character-aligned
centering.
1D 2A n1
n2
d1...dn
]
Define downloaded
bit image In A793 emulation mode, this command scales
the incoming data to provide a best match to the
size of the image as it printed on A793.
1D 2F m Print downloaded
bit image In A793 emulation mode, this command scales
the incoming data to provide a best match to the
size of the image as it printed on A793.
Character appearance
The appearance of text can be changed using the following print modes:

Standard

Rotated

Italic

Compressed

Underlined

Strike-through

Double-high

Bold

Scaled

Double-wide

Reverse

Shading

Upside-down

Rotated

Italic
Width specifications
Standard Compressed

Characters per inch: 15.6

Characters per inch: 20.3

Characters per line: 44

Characters per line: 56