Wincor Nixdorf TH210, Programmer'S Manual

Page: 86 / 152

TH210 Programmer’s Guide
82
Sample Manual Mode Data:
1D 28 6B 03 00 31 44 30 ‘ Set manual parsing
1D 28 6B 0D 00 31 50 30 ‘ Set data size
41 ‘ Set alpha-numeric type
54 45 53 54 31 2D 2E 2F 3A ‘ Alpha-Numeric Data
2C ‘ Delimiter
4E ‘ Set numeric type
31 32 33 34 35 36 37 38 39 30 ‘ Numeric Data
2C ‘ Delimiter
4B
9B 97 82 71 9B 95 82 92 ‘ Set Kanji
‘ Kanji Data
2C ‘ Delimiter
42 30 30 30 38
54 2C 45 2C 53 2C 54 2C ‘ Set binary and block length (0 0 0 8 = 0x00 0x08 = 8 bytes)
‘ Binary Data (0x2Cs are valid data, not delimiters)
Print symbol data for QR code
ASCII
Hexadecimal
Decimal GS ( k ETX NUL 1 Q 0
1D 28 6B 03 00 31 51 30
29 40 107 03 00 49 81 48
This command encodes and prints the QR code symbol data in the symbol storage area, based on
the settings in the previous four commands.
In standard mode, use this function when printer is “at the beginning of a line,” or “there is no
data in the print buffer.”
The symbol size that exceeds the print area cannot be printed.
If there is no data in storage, or if the data in the storage area is more than the data allowed by
specified model and data compaction mode, the QR code cannot be printed.
The following data are added automatically by the encode processing.
Position Detection Patterns
Separators for Position Detection Patterns
Timing Patterns
Format Information Version Information
Error Correction code words (employs the Reed-Solomon Error Detection and Correction
algorithm)
Pad codeword
Number of bits in Character Count Indicator Mode Indicator
Terminator
Alignment Patterns (when model 2 is selected)
Extension Patterns (when model 1 is selected)
Printing of symbol is not affected by print mode (emphasized, double-strike, underline,
white/black reverse printing, or 90° clockwise-rotated), except for character size and upside-down
print mode.
In standard mode, this command executes paper feeding for the amount needed for printing the
symbol, regardless of the paper feed amount set by the paper feed setting command, The print
position returns to the left side of the printable area after printing the symbol, and printer is in the
status “beginning of the line,” or “there is no data in the print buffer.”
In page mode, the printer stores the symbol data in the print buffer without executing actual
printing. The printer moves print position to the next dot of the last data of the symbol.