Wincor Nixdorf TH210, Programmer'S Manual

Page: 87 / 152

TH210 Programmer’s Guide
83
A quiet zone of four times the size of one module is required on all sides of the QR code symbol,
but it is not included in the printing data. Be sure to add a quiet zone when using this function.
Select printing position of HRI characters
ASCII
Hexadecimal
Decimal
Value of
n :
GS H n
1D 48 n
29 72 n
Printing position
0 = Not printed
1 = Above the bar code 2 = Below the bar code
3 = Both above and below the bar code
Default:
0 (Not printed)
Prints HRI (human readable interface) characters above or below the bar code.
Select pitch of HRI characters
ASCII
Hexadecimal
Decimal
Value of
n :
GS f n
1D 66 n
29 102 n
Printing position
0, 48 = Standard Pitch at 15 CPI
1, 49 = Compressed Pitch at 20 CPI
Default:
0 (Standard Pitch at 15 CPI)
Selects standard and compressed font for printing bar code characters using 1D 48 n (see above).
Select bar code height
ASCII
Hexadecimal
Decimal
Value of
n :
Range of n :
GS h n
1D 68 n
29 104 n
Number of dots
1-255
Default:
216
Sets the bar code height to (n/154 inch).
Print bar code
First Variation Second Variation
ASCII
Hexadecimal
Decimal
GS k m d1…dk NUL
1D 6B m d1…dk 00
29 107 m d1…dk 0
(0 = End of command
GS k m n d1…dn
1D 6B m n d1…dn
29 107 m n d1…dn
Selects the bar code type and prints a bar code for the ASCII characters entered. If the width of the
bar code exceeds one line, the bar code is not printed.