manualshive.com logo in svg

Weinmann MEDUCORE Standard2, Instructions For Use Manual

Share
Download
Weinmann MEDUCORE Standard2 Instructions For Use Manual Download Page 98

98

EN MEDUCORE 

Standard

2

WM

 6840

1 

0

4

/2

021

4 Preparation

3. Set the printer the right way up.

Result

The printer battery is inserted in the printer.

4.7.3 Inserting printer paper

Requirement

•

The printer is not printing.

•

The printer paper provided by WEINMANN Emergency is in 
use.

•

The printer has been removed from the printer case.

1. Push down the latch to release the paper compartment cover.

2. Open the paper compartment cover.

Risk of injury from electric shock when simultaneously 
touching a printer and the patient!

Simultaneously touching a printer and the patient may lead to an 
electric shock and injure the patient.

Stand clear of the patient if the printer is out of its case.

Summary of Contents for MEDUCORE Standard2













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands