Weinmann MEDUCORE Standard2, Instructions For Use Manual

Page: 190 / 396

190 EN MEDUCORE Standard
2
WM
6840
1
0
4
/2
021
6 Operation
8. If necessary: Set alarm limits in the user menu (see “10.3.1
Alarm settings”, page 255) .
Alternatively:
Set automatic alarm limits in the application menu (see “9
Application menu”, page 248) .
9. If necessary: Press the Back function button.
Alternatively:
Press the NIBP button for < 2 s.
The device exits NIBP function mode and switches to the set
mode.
10. Once the measurement is finished: Remove the NIBP cuff.
Result A non-invasive blood pressure measurement (NIBP measurement)
has been carried out.
6.12.3 Carrying out interval measurement
During an interval measurement ( Interval function button), the
device carries out several successive NIBP measurements. The
interval duration indicates the time between two successive NIBP
measurements.
Requirement • The device is switched on (see “6.1 Switching on the device”,
page 118) .
• A patient group is selected (see “6.4 Selecting patient group”,
page 120) .
• A non-invasive blood pressure measurement (NIBP
measurement) is prepared
(see “6.12.1 Preparing non-invasive
blood pressure measurement (NIBP measurement)”,
page 182)
.
1. Press the NIBP button for < 2 s.
The device switches to NIBP function mode.