Weinmann MEDUCORE Standard2 Instructions For Use Manual Download Page 100

Page: 100 / 396

100

EN MEDUCORE

Standard

6840

021

4 Preparation

6. Press and hold the feed button (FEED) on the printer for a few

seconds to feed printer paper about another 10 cm.

Result

The printer paper is inserted.

4.7.4 Stowing the printer in the printer case

Requirement

•

The printer battery is inserted

(see “4.7.2 Inserting the printer

battery”, page 97)

•

The printer paper is inserted

(see “4.7.3 Inserting printer

paper”, page 98)

1. Open the zip on the printer case.

2. Stow the printer in the holder provided for it in the printer case.

3. If required: Stow spare printer paper in the holder provided for

it in the printer case.

Risk of injury from contaminated printer!

A contaminated printer cannot be subjected to complete hygienic
reprocessing. This may injure the patient and the user.



Only ever use the printer in the printer case.

Summary of Contents for MEDUCORE Standard2













































































































































































































































































































































































































Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Brands by name

Popular brands

Weinmann MEDUCORE Standard2, Instructions For Use Manual

Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Brands by name

Popular brands