Weinmann MEDUCORE Standard2, Instructions For Use Manual

Page: 290 / 396

290 EN MEDUCORE Standard
2
WM
6840
1
0
4
/2
021
12 Configuration by the operator
12 Configuration by the operator
12.1 Enabling options
Requirement There is an enable code for a new option.
1. Activate the operator menu (see “13.1 Activating the operator
menu”, page 307) .
2. Select System settings | Enable options | Enter enable
code .
3. Enter the enable code for the new option.
The new option appears as a selection under System
settings | Enable options .
4. Activate/deactivate a new option with a check mark.
Result A new option is enabled for use and activated/deactivated.
12.2 Pair printer with device (only with
Printing option)
Requirement • A charged printer battery is inserted (see “4.7.2 Inserting the
printer battery”, page 97) .
• The printer paper is inserted (see “4.7.3 Inserting printer
paper”, page 98) .
• The Printing option is enabled and activated (see “13.12
System settings”, page 342) .
1. Position the printer next to the device.
2. Press the On/Off button of the printer for > 5 s.
The status indicator of the printer is green and an audible signal
sounds.
3. Switch on the device (see “6.1 Switching on the device”,
page 118) .
The start menu appears.
4. Activate the operator menu (see “13.1 Activating the operator
menu”, page 307) .