Weinmann MEDUCORE Standard2 Instructions For Use Manual Download Page 92

Page: 92 / 396

EN MEDUCORE

Standard

6840

021

4 Preparation

4.6 Using an SD card

4.6.1 Inserting an SD card

The device has only a limited internal memory. To record session
data over an extended period of time, you must insert an SD card:

1. Open the water jet protection of the SD card slot.

2. Push the SD card into the SD card slot until you hear it engage.

When doing so, please note: The beveled corner of the SD card
must be at the front on the right during insertion.

3. Close the water jet protection to protect the device from

ingress of dust and water.

Result

The SD card is inserted in the device and ready for use.

Loss of data due to incorrect SD card!

Functionality may be restricted or data may be lost in the case of
SD cards not ordered via WEINMANN Emergency.



Only use SD cards approved by WEINMANN Emergency for use
with this device.



Do not use the SD card for third-party files.

Summary of Contents for MEDUCORE Standard2













































































































































































































































































































































































































Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Brands by name

Popular brands

Weinmann MEDUCORE Standard2, Instructions For Use Manual

Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Brands by name

Popular brands