Weinmann MEDUCORE Standard2 Instructions For Use Manual Download Page 97

Page: 97 / 396

6840

021

MEDUCORE Standard

4 Preparation

6. When the LED on the power supply unit and charger is green:

Take the printer battery out of the charging station for the
printer battery.

Alternatively:

If the FULL CHARGED LED is green: Take the printer battery out
of the quadruple charging station for the printer battery.

Result

The printer battery is fully charged.

4.7.2 Inserting the printer battery

Requirement

•

The printer battery is fully charged

(see “4.7.1 Charging the

printer battery”, page 94)

•

The printer is switched off.

1. Turn over the printer.

2. Insert the printer battery in the battery compartment of the

printer until you hear it engage.

Risk of injury from electric shock when simultaneously
touching a printer and the patient!

Simultaneously touching a printer and the patient may lead to an
electric shock and injure the patient.



Stand clear of the patient if the printer is out of its case.

Summary of Contents for MEDUCORE Standard2













































































































































































































































































































































































































Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Brands by name

Popular brands

Weinmann MEDUCORE Standard2, Instructions For Use Manual

Search results

Summary of Contents for MEDUCORE Standard2

Reviews:

Brands by name

Popular brands