WAGNER Titanus Micro-Sens Technical Manual Download Page 190

Page: 190 / 238

Maintenance

TITANUS

MICRO·SENS

190

06/13

Exchanging the air filter for the device base

Figure 109: Exchanging the type AF-HBTM air filter in the TITANUS MICRO·SENS

device base

1. With the aid of a screwdriver, loosen the four screws on the detection

unit and remove it from the device base.

2. Pull both filter mountings out of the device base and remove the filter in-

serts. Conduct a visual check for dirt and if necessary change the filters.
Then replace the filter mounting.

3. Now with the aid of a screwdriver screw the four screws on the detection

unit down again firmly.

4. The device initialises automatically when the jumper X4 is changed.

9.5

Summary of Contents for Titanus Micro-Sens















































































































































































































































Search results

Summary of Contents for Titanus Micro-Sens

Reviews:

WAGNER Titanus Micro-Sens, Technical Manual, Page: 190 / 238

Search results

Summary of Contents for Titanus Micro-Sens

Reviews: