W6 N 707D free-arm Manual Download Page 65

Page: 65 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Using the threader

Threading

Place the thread in the notch at the tip of the threader.

Attention: Example image

Position the threader with the thread in front of the eye of the needle

and press carefully and gently against the needle.

In doing so, a small metal pin pushes the thread through the eye of

the needle. A loop is formed.

Attention: Example image

Grab the thread loop and pull the end of the thread through the eye of

the needle.

ATTENTION:

Handle the threader with care.

A damaged threader is not a warranty claim!

» The thread has been threaded through the eye of the needle

W6 tip

In this regard, also view the video “Optimal threading” (4 minutes) under

Help/W6 N 707D free-arm /Videos

on our website at www.w6-

werarbeit.de.

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands