W6 N 707D free-arm Manual Download Page 27

Page: 27 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Setting the differential feed dial

Operating elements

5.12 Setting the differential feed dial

In this manual, differential feeding refers to the feeding of fabrics at

different speeds when sewing. The setting of the differential feed dogs

depends on the fabric to be sewn and the degree of gathering or

stretching that is desired.
Whether the fabric is stretched or gathered by the differential feed dogs

depends on the feed differential that has been set between the front and

rear feed dogs. This is the so-called differential feed ratio.

Differential feed dial

The differential feed ratio can be set within a range from 1:0.6 to 1:2.0.

The setting is changed by means of the differential feed dial. If no

differential feed is desired, set the dial to the neutral value “N”. The

differential feed ratio is then 1:1.

Differential feed

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands