W6 N 707D free-arm Manual Download Page 63

Page: 63 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

4. ORANGE thread guide path (threading needle thread C)

Threading

Gently pull the orange thread on the metal needle bar from the left to the left

position.

10.

Turn the hand wheel forwards towards you until the needles are in the

highest position.

11.

Thread the orange thread through the eye of sewing needle C on the far left

by means of the threader.

You can also thread the orange thread through the needle from front to back

by means of tweezers.

12.

Guide the orange thread 10 to 15 cm out to the left under the needles.

» The orange thread has been threaded into needle thread C

W6 tip

In this regard, also view the video “Optimal threading of a W6 N 707D

free-arm” (4 minutes) under Help/W6 N 707D free-arm on our website

at www.w6-werarbeit.de.

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands