W6 N 707D free-arm Manual Download Page 36

Page: 36 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Inserting a needle

Changing needles

Risk of injury posed by unexpected start-up

The foot controller is on the floor. This can lead to the cover starting up

unexpectedly if the foot controller is activated by, for example, a child, a

sufficiently heavy pet, an object or accidental pressing by the user

themselves.

►

Always unplug the power plug before changing a needle.

Risk of injury posed by breaking needles

If the needle is inserted incorrectly, it can break and damage the cover.

There is a risk of injury posed by uncontrollably moving parts.

►

Always change the needle in the manner described.

Please proceed as follows:

Turn the

‹hand wheel›

forwards towards you until the needles are in

the highest position.

The needles must be in the highest position!

CAUTION

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands