W6 N 707D free-arm Manual Download Page 77

Page: 77 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Maintenance that must be performed by the customer

Maintenance

11.2.2 Oiling the cover

Risk of injury posed by unexpected start-up

The foot controller is on the floor. This can lead to the cover starting up

unexpectedly if the foot controller is activated by, for example, a child, a

sufficiently heavy pet, an object or accidental pressing by the user

themselves.

►

Always unplug the power plug before replacing the presser foot.

Risk of material damage

Unsuitable oil might damage your cover.

Only use acid-free and resin-free oil, such as our W6 sewing machine oil

Regularly oil the lubrication points of the hook as well as other reachable

moving metal parts of the cover with a few drops of W6 oil.

CAUTION

NOTICE

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands