Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR
1. Brown thread guide path (threading the lower looper)
Threading
12.
Pull the threader for the lower thread gently to the far right with the
white lever.
12a.
The brown thread must remain in
front of the tension hook of the
extracted threader.
Attention: The threader is pulled out
completely up to the stop.
12b.
Gently release the threader that is
still tensioned outwards. The spring
balancer moves the threader to the
far left to the starting position. The
hidden rear threading point on the
looper end has been threaded
automatically.
13.
The brown thread of the lower thread looper has been threaded.
Cut the thread to a length of 10 cm
with scissors. The thread end
(10 cm) hangs down from the tip of
the lower looper.
14.
Close the front cover hook flap.
Tips for the end of threading:
All threads must be threaded. Hold the threads individually on the
presser foot or lower loop with one hand. With your other hand,
hold the thread up to the telescopic arm. Now, pull the individual
thread on the telescopic arm hard in the direction of the telescopic
arm.
W6 tip
In this regard, also view the video “Optimal threading of a W6 N 707D
free-arm” (4 minutes) under Help/W6 N 707D free-arm on our website at
www.w6-werarbeit.de.
45
