W6 N 707D free-arm Manual Download Page 9

Page: 9 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

DANGER

CAUTION

2 Assembling your cover

Unpacking

Assembling your cover

In this chapter you will find information regarding the assembly of the cover:

•

Unpacking (Page 9)

•

Setting up (Page 10)

•

Assembling your cover (Page 10)

•

Unplugging the power plug (Page 14)

2.1 Unpacking

You are responsible for shipping the cover to a specialist workshop when it

requires inspection or repair. To avoid any damage, please send the cover

in its original packaging. Therefore, we recommend that the packaging

material, including the polystyrene, be kept. In this case, ensure that all

packaging material is stored beyond the reach of children.

There is a risk of suffocation

On delivery, the cover is packed in a plastic bag. This poses a risk of

suffocation for children who play with it.

►

Cut up the plastic bags.

►

Take care that children do not play with the packaging material.

The cover is supplied with needles installed

There is a risk of being pricked by the needles.

►

Be careful of the needles when unpacking.

Please proceed as follows:

Unpack the cover on a suitable surface.

Unpack the telescopic arm with the thread guide rack.

Cut up all plastic bags that are supplied with the cover.

Store the packaging material in a secure place beyond the reach of

children.

Should you wish to dispose of it, do not simply throw the packaging

material away but send it for recycling.

5. The cover has been unpacked

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands