W6 N 707D free-arm Manual Download Page 64

Page: 64 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Using the threader

Threading

8.6 Using the threader

The cover is equipped with a needle threader, enabling you to thread the

thread through the eye of the needle more easily.

Risk of injury posed by unexpected start-up

The foot controller is on the floor. This can lead to the cover starting up

unexpectedly if the foot controller is activated by, for example, a child, a

sufficiently heavy pet, an object or accidental pressing by the user

themselves.

►

Always unplug the power plug before threading the thread.

Please proceed as follows:

Turn the

‹hand wheel›

forwards (towards you) until the needle is in the

highest position.

Lower the presser foot completely by setting the

‹presser foot lifter›

the lowest position.

CAUTION

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands