W6 N 707D free-arm Manual Download Page 2

Page: 2 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Product name

Cover W6 N 707D free-arm

Publisher

W6 Wertarbeit Projektierungs- und Handelsgesellschaft mbH

Bredenbecker Straße 13, D-30974 Wennigsen

Email: [email protected]
www.w6-wertarbeit.de
This document is protected by copyright. All rights reserved. The document

may not, in whole or in part, be copied, reproduced, translated or reduced to

an electronic medium of machine-readable form without the explicit

permission of W6 WERTARBEIT Projektierungs- und Handelsgesellschaft

mbH.

Preamble

Thank you very much for buying a W6 product.
We have included a comprehensive manual, so that you may easily learn

how to operate the machine. It will help you to familiarise yourself with your

machine quickly. Please register your machine online at www.w6-

wertarbeit.de under “Service/Guarantee registration”. Moreover, W6

WERTARBEIT offers the following options on its website for free. To access

these, please go to our website using www.w6-wertarbeit.de and select

“HELP”.

•

Criteria for the optimal threading of a W6 N 707D free-arm (4-min.

video).

•

A tutorial video specifically for the W6 N 707D free-arm.

•

Maintenance, tips and tricks for the W6 N 707D free-arm.

•

A visual selection of stitches and their use.

In addition to that, W6 WERTARBEIT offers a wide range of sewing projects

online to inspire you; come and take a look.
Please read the manual and the safety notes carefully before operating the

machine.

W6 tip

Subscribe to our W6 newsletter. We will keep you up-to-date and you may

take part in our special promotions.

Please enjoy your new sewing machine.

W6 WERTARBEIT

The W6 WERTARBEIT company headquarters are based in a deconsecrated church

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands