W6 N 707D free-arm Manual Download Page 30

Page: 30 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Changing the presser foot

To lift the presser foot, push the

‹presser foot lifter›

up.

The presser foot lifter for lifting or lowering the presser foot is located on

the right exterior at the very top.

Press the small red

‹lever›

on the back to release the

‹presser foot›

from the

‹presser foot holder›

▼

The presser foot is automatically released from the holder when the

lever is pressed.

Place the new

‹presser foot›

on the needle plate beneath the

‹presser foot holder›

Place the

‹presser foot holder›

on the centre of the bar of the new

‹presser foot›

Make sure that the presser foot bar is aligned with the recess in the

‹presser foot holder›

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands