Volvo EC60E, Operator'S Manual, Page: 233 / 342

Preventing machine damage
When lifting or supporting the machine or parts of
the machine, use equipment with a sufficient
lifting capacity.
Lifting devices, tools, working methods,
lubricants and parts prescribed in the Operator's
Manual should be used. Volvo Construction
Equipment will not accept any responsibility
otherwise.
Make sure that no tools or other objects, which
may cause damage, have been forgotten in or on
the machine.
Release the pressure in the hydraulic system
before starting the service work.
Never set a relief valve to a higher pressure than
that recommended by the manufacturer.
Machines, which are used within a polluted or in
another way insanitary area should be equipped
for this kind of work. Special safety regulations
apply when servicing such a machine.
When installing two-way radio, mobile telephone
or similar equipment, the installation should be
carried out in accordance with the manufacturer's
instructions in order to eliminate interference with
the electronic system and components intended
for the function of the machine, see page
23
.
Measures to be taken in connection with electric
welding, see page 280 .
Make sure that all covers on the machine are in
position before the engine is started and the
machine is put to work.
232
Safety when servicing
Before service, read