Volvo EC60E, Operator'S Manual, Page: 118 / 342

Seat belt
WARNING
Risk of serious injury!
Unexpected machine movement can cause the
operator to be ejected from the machine, causing
serious injuries.
Operate the machine only while seated in the
operator seat with the seat belt fastened.
The seat belt is critical to operator safety and must
be worn at all times during machine operation to
prevent the operator from being ejected from the
cab or the operator platform if the machine rolls over
or is involved in an accident. A fastened seat belt
also helps the operator to maintain control of the
machine if it moves suddenly or in an unexpected
way. Failure to wear a seat belt during machine
operation could result in serious injury or death. The
seat belt is intended for one adult only. Keep the
belt rolled up when not in use.
WARNING
Risk of serious injury or death.
A damaged seat belt could cause serious injury or
death.
Check the seat belt and associated parts before
start of machine operation.
Check the seat belt and associated parts daily.
Ensure mounting hardware is tight. Replace the
entire seat belt immediately if there is any wear, the
webbing is worn, cut, has loose stitching, the belt is
deformed or the seat belt retractor does not work.
Replace the seat belt if the machine has been
involved in an accident where the belt has been
subjected to high strain or loading. Inspect
mounting hardware. Changes to the belt or its
mountings must never be made.
Only clean with warm water, do not use soap or
detergent. Let the belt dry while it is fully pulled out
before rolling it in.
Volvo Construction Equipment recommends
replacing seat belt assemblies every 3 years
regardless of appearance.
Other controls
Operator comfort 117