Volvo EC60E, Operator'S Manual, Page: 144 / 342

The operator must check that the mirrors and
camera (if installed) are in good condition, clean,
and adjusted correctly for good visibility before
operating the machine.
NOTE!
Camera (if installed) is not adjustable on the
machine. Check that the camera screen is
displayed correctly on the I-ECU when pressing the
camera button on the keypad.
The operator must be in control of the machine's
work area.
- Prevent persons from walking or standing
under raised excavating equipment or
suspended loads, unless it has been made safe
or supported.
- Prevent persons from entering or remaining in
the work area, i.e., the area around the machine
and at least 7 m (23 ft) beyond the maximum
reach of the attachment. However, depending
on the job site’s organization, the operator may
allow a person to remain in the work area, but
must then observe caution and operate the
machine only when the person can be seen or
has given clear indications of where he or she
is.
- Prevent persons from being in the cab of a
vehicle that is in a location with a risk that the
cab may be hit by other machines or falling
objects, for example, stones or logs. This does
not apply if the cab is sufficiently strong or is
protected to withstand the impact of such
external forces.
- Make sure that you know the weight limitation
of the ground on which the machine is working.
The operator may only take an instructor on board,
if there is an approved instructor's seat in the
machine.
WARNING
Risk of fatal accidents.
Using attachments for lifting or transporting persons
may lead to fatal accidents with serious crushing
injury or death.
Never use attachments for lifting or transporting
persons.
X
V1170147
Operating instructions
Safety rules when operating 143