VLX 1040S, Operator'S Manual

Page: 73 / 416

ENGLISH
21
9.4. Maintenance
The table below indicates the Person Responsible for each procedure.
O = Operator
T = Trained Personnel.
Interval Person
Resp.
Key Description Procedure Lubricant/Fluid
Daily O 1 Pad(s) Check, flip or replace
O 1 Brush(es) Check, clean
O 6 Squeegee Clean, check for damage
and wear
O 8 Scrub head skirt Check for damage and
wear
O 2 Recovery tank Drain, rinse, clean float
shut-off screen and debris
tray
O 3 Solution tank Drain, rinse
O 4 Severe Environment tank (option) Check, refill CAD
O 5 Automatic battery watering tank (option) Check, refill DW
O 7 Batteries Charge if necessary
Weekly O 7 Battery cells Check electrolyte level DW
O 7 Battery compartment Check for liquid
O 6 Squeegee assembly drip trap reservoir (dual disk
model)
Check. Clean
50 Hours O 2 Recovery tank lid seal Check for wear
O 9 Solution tank filter Remove and clean
100 Hours O 7 Battery watering system (option) Check hoses for damage
and wear
200 Hours O 7 Batteries, terminals and cables Check and clean
T 13 Steering chain Lubricate, check tension,
and check for damage and
wear
GL
T 14 Steering cable Check tension, Check for
damage and wear
750 Hours T 10 Vacuum motor Replace carbon brushes
1250
Hours
T 11 Propel motor Replace carbon brushes
T 12 Brush motor(s) Replace carbon brushes
LUBRICANT/FLUID
DW Distilled water
CAD Commercial approved detergent
GL
SAE 90 weight gear lubricant