6
Multi-Lane
4/2022 (EN)
The degree of loading (a value
≤
1) is determined as
degree of loading
=
NUM/SUML
• NUM
=
number of standard accessory parts
• SUML
=
sum of the Multi-Lane profile lengths (in me-
tres)
Example calculation:
The surface fitted with Multi-Lane profiles (converted
surface) is 15 m x 10 m
=
150 m².
The total length of all Multi-Lane profiles installed is 65 m,
together with 40 standard accessory parts.
Degree of loading
=
40/65
=
0.62
Surface load
=
65 x 175 kg x 0.62 /
150 m²
=
47 kg/m² (0.47 kN/m²)
Definition of the suspension points and loads
WARNING
When the Multi-Lane profile is closed and installed
flush with the ceiling, the loads from this ceiling
construction must not be transferred to the Multi-
Lane profile. The ceiling installer must ensure that
this is the case. Only minimal loads that result from
the requirement of a perfect joint, using the rel-
evant profiles, is permitted.
3.2 Application options depending on the profile length
Connector with ceiling attachment
A *
Fig. 4: Connector with ceiling attachment
*In the case of axes up to a maximum of 1500 mm, use a connector with ceiling attachment at the intersection points.
