15
Multi-Lane
4/2022 (EN)
5. Fix the clamp of the securing element on the ceiling
rail.
Â
The merchandise support is securely fixed.
A
B
Fig. 29: Attaching the securing element
WARNING
Assembly must proceed according to the assem-
bly instructions. Otherwise the equipment may not
work properly.
>
The red indicator colour on the side of the two
actuator levers must no longer be visible.
>
Fix the clamp of the securing element to the ceil-
ing rail.
4.3 Addition: Rotating merchandise
support
355˚
Fig. 30: Rotating the merchandise support
4.4 Removing the suspended merchandise
support frame with the hanger
adapter
WARNING
The merchandise support can fall down when the
hanger adapter is opened.
>
The merchandise support must be held firmly.
On the hanger adapter, press both levers (Fig. 31/1) up
so that the tabs open (Fig. 31/2).
2
1
Fig. 31: Removing merchandise support
4.5 Attaching the suspended merchandise
support frame with the screw adapter
The merchandise support frames are disassembled when
delivered. The side parts are pre-assembled.
1. Mounting the connecting tubes to the side parts.
1.
2.
Fig. 32: Connecting the side parts to the tubes
NOTE
The connecting tubes must be rotated with the as-
sembly tool 111-844.12 and positioned properly.
WARNING
Risk of injury from goods or merchandise supports
falling down.
>
Never loosen the screws shown in the following
illustration.
WARNING
Risk of injury from goods or merchandise supports
falling down. The system can fail if the maximum
permissible load of the merchandise support is ex-
ceeded.
>
Observe the maximum load values of the indi-
vidual merchandise supports.
>
Do not exceed the maximum load of 160 kg per
frame.
>
The merchandise supports must only be moved in
the unloaded state.
