31
Multi-Lane
4/2022 (EN)
2. Plug together the cable on the output of the cable
conduit and the cable protruding out of the frame
guide. Screw the assembly plate (1) onto the under-
side of the guide.
3. Installation of the frame guide as described at „7.1
Attaching frame on castors with guide adapter“.
1
*
Fig. 80: Cable connection / *Plug connection
WARNING
Risk of injury from goods or frames falling down.
The system can fail if the maximum permissible load
of the frames is exceeded.
>
Please note the maximum load value of the indi-
vidual frames.
>
Do not exceed the maximum load of 160 kg per
frame.
>
The fames must only be moved in the unloaded
state.
7.4 Removing the frame on castors with
the 230 V cable conduit.
See Section „7.2 Removing frame on castors with guide
adapter“.
8 Merchandise supports
8.1 Merchandise support suspension
system
Suspending support frame for shelves and hanging
rail
On the electrified merchandise support frame, only the
tube that is connected to the converter is electrified.
2.
1.
3.
1
2
24 V
Fig. 81: Shelf support electrified (1), not electrified (2)
NOTE
Observe the position of the electrified shelf support (1).
Fig. 82: Suspension system
Dimensions for glass shelves
Glass shelves have to be made according to drawing
no. 704-278 (1290 mm) / no. 704-279 (640 mm). The
construction drawings are available to download in the
product section at www.visplay.com.
Dimensions for wooden shelves
Wooden shelves have to be made according to draw-
ing no. 704-280 (1290 mm) / no. 704-281 (640 mm). The
construction drawings are available to download in the
product section at www.visplay.com.
