32
Multi-Lane
4/2022 (EN)
8.2 Support frame for non-electrified shelf
The support frames are used to install glass and wooden
shelves. They are suspended between the uprights using
shelf supports.
A 650
A 1300
25 x 25
Fig. 83: Support frame for non-electrified shelf
Drawing number:
704-278 glass shelf 1290 mm
704-279 glass shelf 640 mm
704-280 wooden shelf 1290 mm
704-281 wooden shelf 640 mm
8.3 Support frame for electrified shelf
The support frames are used to install glass and wooden
shelves. They are suspended between the wall uprights
using shelf supports. The shelf support set consists of two
supports, whereby one of them is used for power con-
sumption. A 5 W/10 W LED light is built into the electrified
support frame. The power take-up is on the left side.
A 650
A 1300
Fig. 84: Support frame for electrified shelf
NOTE
When using the electrified version, attention must
be paid to the position of the electrified shelf sup-
port (1) on the shelf frame. The default position is
on the left-hand side.
Drawing number:
704-278 glass shelf 1290 mm
704-279 glass shelf 640 mm
704-280 wooden shelf 1290 mm
704-281 wooden shelf 640 mm
8.4 Hanging rail
The hanging rail is suspended between the uprights us-
ing shelf supports.
A 650
A 1300
Fig. 85: Hanging rail
8.5 Hanging rail with front arms
The hanging rail is suspended between the wall uprights
using shelf supports.
A
B
Fig. 86:
Fig. 86: Hanging rail with front arms
Hanging rail with front arms
The hanging rails are available in the following configu-
rations:
• Hanging rail with one front arm on both sides for
650 mm axis (A)
• Hanging rail with two front arms on both sides for
1300 mm axis (B)
8.6 LED suspension light
The LED suspension light is suspended between the mer-
chandise support frames.
Fig. 87:
25 × 25
640
1300
LED suspension light
8.7 Plug-in shelf brackets
The plug-in shelf brackets are inserted via the lower con-
necting tube.
Fig. 88:
Fig. 88: Plug-in shelf brackets with anti-rotation device
Plug-in shelf brackets with anti-rotation device
