16
Multi-Lane
4/2022 (EN)
WARNING
Risk of injury from falling merchandise supports.
During assembly, the merchandise support could
fall down at any time.
>
The merchandise support must be firmly held
during assembly.
2. Undo the clamping plates of the screw adapter ap-
prox. 50 mm with an SW5 Allen key.
50 mm
Fig. 33: Prepare screw adapter
3. Guide the screw adapter vertically from below into
the Multi-Lane ceiling rail.
4. In order to preliminarily secure for the merchandise
support, loosely fix the clamping plates on the Multi-
Lane rail using the Allen key and, after final position-
ing has taken place, firmly tighten with 10 Nm.
*
F
=
10 Nm
Fig. 34: Attaching merchandise support
*
Preliminary securing by loosely fixing the clamping plates
5. Fix the clamp of the securing element on the ceiling
rail.
Â
The merchandise support is securely fixed.
Fig. 35: Securing the merchandise support and attaching the securing element
NOTE
Assembly must proceed according to the assembly
instructions. Otherwise, the equipment may not
work properly.
4.6 Addition: Rotating merchandise
support
355˚
Fig. 36: Rotating the merchandise support
4.7 Removing the suspended merchandise
support frame with the screw adapter
WARNING
Risk of injury from goods or merchandise supports
falling down. During dismantling, the merchandise
support could fall down at any time.
>
Keep the securing element clamped to the Multi-
Lane rail using a clamp.
>
Hold the merchandise support firmly.
1. Screw on the clamping plate of the screw adapter by
rotating the screws counter-clockwise with the SW5
Allen key.
Fig. 37: Removing merchandise support
