background image

4

Multi-Lane

4/2022 (EN)

1  Safety

1.1  Explanation of symbols

Safety instructions are indicated in this manual as fol-

lows.

 WARNING

A warning notice designated in this manner indi-

cates a dangerous situation that could result in 

death or serious injury if it is not avoided.

NOTE

A warning notice designated in this manner indi-

cates a potentially dangerous situation that could 

result in material damage or environmental dam-

age if it is not avoided.

1.2  Intended use

The product serves exclusively for fitting merchandise 

supports for the presentation of goods and for mounting 

commercial power tracks (230 V).
Only merchandise supports and consumers that comply 

with the specifications in this manual are approved.

In the event of misuse, there is the danger that the 

merchandise supports and the electrical devices will 

be damaged. This can result in injuries and damage 

to the product.
Area of implementation

The product may only be used in the commercial area.

Personnel

This manual describes how to install the product and how 

to operate and clean the product. Consequently after 

the product is installed this manual must be transferred to 

the end user.
Assembly instructions are directed at personnel, who un-

dertake the assembly and the electrical connection (e.g., 

shop fitters, licensed electricians).
The contents of the operating instructions are directed at 

the end users (e.g., sales personnel, visual merchandis-

ers).

1.3  Dangers

 

>

Use only approved accessories and electrical 

devices.

 

>

Comply with the permitted connection, maximum 

load and equipment values.

 

>

Do not lean any ladders against the merchandise 

supports.

 

>

Do not load the merchandise supports above the 

maximum load capacity.

 

>

Do not place any receptacles, from which fluids 

can escape, on the merchandise supports.

 

>

Keep moisture away from current conducting 

components.

2  Product description

Multi-Lane is a ceiling rail system which is particularly 

suited for use directly under room ceilings. It consists of 

aluminium profiles. The bases forms a rail system that is 

attached to the ceiling according to the requirements at 

hand. At each rail, there are three levels, which can be 

used for different elements simultaneously: for example, 

for merchandise supports or ceiling lights, for attaching 

materials between empty spaces, or in order to hide 

installed power supply elements.

WARNING

Risk of injury from goods or merchandise supports 

falling down. If the installation is not executed prop-

erly or if the substrate does not accommodate the 

necessary loads, the system can fail.

 

>

Note and comply with all the following instruc-

tions on assembly.

2.1  Ceiling rails

Dimensions

50

100

35.5

37

62

Fig. 1:  Profile dimensions

2.2  Power supply

Ø 8 mm

50

54

380

Fig. 2:  Converter dimensions

NOTE

Connection values corresponding to manufacturer 

specifications of the power rails used. 

 

>

Please observe the connection power of the mer-

chandise supports used.

Summary of Contents for Multi-Lane





































Reviews: