14
Multi-Lane
4/2022 (EN)
4.2 Attaching the suspended merchandise
support frame with the hanger
adapter
The merchandise support frames are disassembled when
delivered. The side parts are pre-assembled.
1. Mounting the connecting tubes to the side parts.
1.
2.
Fig. 25: Connecting the side parts to the tubes
NOTE
The connecting tubes must be rotated with the as-
sembly tool 111-844.12 and positioned properly.
WARNING
Risk of injury from goods or merchandise supports
falling down.
>
Never loosen the screws shown in the following
illustration.
WARNING
Risk of injury from goods or merchandise supports
falling down. The system can fail if the maximum
permissible load of the merchandise support is ex-
ceeded.
>
Observe the maximum load values of the indi-
vidual merchandise supports.
>
Do not exceed the maximum load of 160 kg per
frame.
>
max. capacity per merchandise support 50 W, or
max. 4 support frame width 1300 mm.
>
The merchandise supports must only be moved in
the unloaded state.
2. On the hanger adapter, press both levers (Fig. 26/1)
up so that the tabs open (Fig. 26/2).
1
2
Fig. 26: Preparing the hanger adapter
3. Insert the hanger adapter into the Multi-Lane ceiling
rail slightly at an angle (Fig. 27/A) and turn it straight
(Fig. 27/B).
A
B
Fig. 27: Inserting and sliding
4. Push in both tabs on the adapter (audibly engaged)
until the red indicator colour is no longer visible.
Fig. 28: Securing the merchandise support
