33
Multi-Lane
4/2022 (EN)
8.8 Front arm, 25x25 L180
Fig. 89: Front arm
NOTE
For avoiding an inclination due to a lopsided load,
use is only recommended for merchandise support
frames when simultaneously using the floor mount-
ing set or to ensure that the load is approximately
symmetrical.
9 Accessories
9.1 LED spotlight
The LED spotlight is plugged into the grid holes on the
electrified side.
Fig. 90: LED spotlight
9.2 M8 universal adapter
The adapter consist of a clamping claw for clipping into
the Multi-Lane rail, with a holding sleeve M8.
Fig. 91: M8 universal adapter
9.3 Power supply, 230 V
The power supply consists of a clamping claw for clip-
ping into the Multi-Lane rail and a suspended cable with
a 230 V shockproof socket. A mounting with a notch
serves as a strain relief. Hereby, the freely suspended
length of the cable can be varied.
The power supply makes it possible to connect electrical
consumers to a power track built into the Multi-Lane rail.
Fig. 92: Clipping in the clamping claw
The connection to the power track takes place via a
multi-adapter for 3-phase power tracks (Nordic Alu-
minium GA69).
Fig. 93: Clamping claw with cable mounting
