
Display, Keys and Menus
The Function Menu
VT200/220 Technical Manual, Rev 1.00.01
26
Doc
#
TM-VT200/220-EN
3.2.2
Using Keys to Navigate and Enter Information
Key Description
Escape.
Cancels the current operation, exits a menu or cancels tare (if active).
Next.
When editing multiple digits, moves to the next digit. Only press this key once you have
finished editing the current (flashing) digit.
Function menu.
Press this key for three seconds to access the function menu.
Up.
Increments (adds one) to the current digit, or moves to the previous menu option in setup.
Enter.
Confirms the current operation or the information entered.
Down.
Moves to the next menu option in setup.
3.2.3
Editing Multiple Digits
To edit multiple digits shown on the display:
1. Take note of the flashing digit. This is the digit you are currently editing. Press
u
(P.TARE
) to increment this digit, until it shows the number you need.
2. Press
t
(
TARE
) to move to the next digit on the right. It should start flashing.
3. Press
u
(
P.TARE
) to increment the flashing digit, until it shows the number you
need.
4. Repeat steps 2 and 3 until you have edited the last digit.
5. Press
(
) to confirm the number you entered.
3.3 The
Function
Menu
The function menu allows you to perform advanced operations like high-resolution
weighing, selecting printing format and viewing alibi memory.
It is accessed by pressing the
TARE
( ) button for three seconds, while in Weighing
Mode (you cannot access the function menu from Counting Mode).
This subchapter explains how to use the menu and provides a summary of its
functions. All operations are explained in more detail further in this document.