manualshive.com logo in svg

Vertical SBX IP 320, Features & Operation Manual

Introducing the Vertical SBX IP 320 system - a comprehensive business communication solution. Enhance your productivity with its advanced features and user-friendly interface. Access the Quick Reference Manual online for free, providing detailed instructions at your fingertips. Download and unlock the full potential of this exceptional product from manualshive.com.

Share
Download
background image

Outgoing Call Access

143

SBX IP 320 Features & Operation Guide

Least Cost Routing (LCR)

LCR is a system programmable feature that automatically selects the least expensive available 
route when an outgoing CO call is made. This programming eliminates the necessity for the user 
to dial the access code of the least expensive carrier. There are three ways to activate LCR:

Internal LCR

 - If dialed digits match an internal LCR code, the system secures a CO Line from 

the programmed CO Group and sends the modified digits according to LCR programming.

Loop LCR

 - When dialing the first accessible CO Group Code (9 or 0), or pressing the [Loop] 

button, if the dialed digits match a COL LCR code, the system will secure a CO Line from the 
programmed CO Group and send the modified digits according to LCR programming.

Direct CO LCR

 - After dialing a CO Line or CO group code (9 or 0, depending on the nation 

you are calling from), or pressing a CO Line or CO group button, LCR can be activated. If the 
dialed digits match a COL LCR code, the system will secure a CO Line from the programmed 
CO group and send the modified digits according to LCR programming.

When a user selects a CO Line and dials a destination number, the system checks the LCR 
programming and sends the call according to the least cost route according to the ADMIN 
program.

Operation

To activate Internal LCR:

Dial the internal LCR Code after lifting the handset or pressing the [SPEAKER] button 
(on-hook dialing can also activate LCR). It is an internal LCR Code if the code is 
programmed with internal or both in the Leading Digit Table.

To activate Loop LCR:

1.

Dial COL LCR code after dialing the first accessible CO Line or CO Group access code 
(0 or 9), or press the [Loop] button.

2.

It is a COL LCR code if the code is programmed with COL or BOTH in the Leading 
Digit Table.

To activate Direct CO LCR:

Dial the COL LCR code after dialing a CO or CO Group Access code, or press a CO or 
CO Group button. It is a COL LCR code if the code is programmed with COL or BOTH 
in the Leading Digit Table.

Ex. 1 Add Prefix Digit - The long distance call access code starts with 0 (e.g., 02, 031, 051). If 
a cheaper carrier exists, the user can access it with the carrier access code 082 and the long 
distance access code without 0.

Summary of Contents for SBX IP 320

























































































































































































































































Reviews:

No comments

Related manuals for SBX IP 320

GE 30524 Quick Start Manual preview
30524
Brand: GE Pages: 2
Talkswitch TS-100 Owner'S Instruction Manual preview
TS-100
Brand: Talkswitch Pages: 26
Sagem D142 User Manual preview
D142
Brand: Sagem Pages: 2
Trotec PCSS 05-20V Original Instructions Manual preview
PCSS 05-20V
Brand: Trotec Pages: 20
Vingtor Stentofon VSP-211M-L User Manual preview
VSP-211M-L
Brand: Vingtor Stentofon Pages: 4
Uniden DCT758 Series (French) Manual D'Utilisation preview
DCT758 Series
Brand: Uniden Pages: 89
Binatone Elite 2025 User Manual preview
Elite 2025
Brand: Binatone Pages: 2
Telco GCE3100 Assembly & Use Instructions preview
GCE3100
Brand: Telco Pages: 15
VTech DS6751 Manual preview
DS6751
Brand: VTech Pages: 16
Kodak PH209 Quick Start Manual preview
PH209
Brand: Kodak Pages: 25
Depaepe Telecom Premium 10 User Manual preview
Premium 10
Brand: Depaepe Telecom Pages: 2
BELGACOM Twist 405 User Manual preview
Twist 405
Brand: BELGACOM Pages: 34
GE Skype 810 User Manual preview
Skype 810
Brand: GE Pages: 60
Makita SH02 Instruction Manual preview
SH02
Brand: Makita Pages: 36
Makita JR180D Instruction Manual preview
JR180D
Brand: Makita Pages: 60
Makita JR140D Instruction Manual preview
JR140D
Brand: Makita Pages: 52
Panasonic KX-TC1801 User Manual preview
KX-TC1801
Brand: Panasonic Pages: 8
Panasonic KX-TC1831W User Manual preview
KX-TC1831W
Brand: Panasonic Pages: 8

Brands by name

Popular brands

Load more brands