Internet Protocol (H.450)
121
SBX IP 320 Features & Operation Guide
Net Conference
Net Conference is generally the same as the Conference feature, with the additional
specification that a Networked Station can be assigned as a conference member.
A call to a Station on one node is able to conference in a party on any other networked node. Up
to 3 Stations of the network can be members of a conference.
Operation
To conduct a conference from a Station:
1.
Press the [CONF] button, during a network conversation. The connected call is put on
hold and the ICM dial tone sounds.
2.
Make a Net Call to a Station on another Networking System.
3.
Press the [CONF] button when the second Called Station is answered; the call is put on
hold and an ICM dial tone sounds.
4.
Press the [CONF] button again; the conference voice path to all members is connected.
To cancel a Conference:
Any Station on a net conference call can hang up during the conference. The net
conference will be ended and the network path will be cleared.
Conditions
•
An IP phone cannot be the master station in the Net Conference.
•
When an IP phone sends a Net Conference Invite Setup message to a Non-IP phone, the
message will be rejected.
•
When a Non-IP phone sends a Net Conference invite to an IP phone, the normal Setup
message should be sent to the IP phone instead of the Invite Setup message.
Admin Programming
•
Networking Basic Attribute (PGM 320)
•
Network Routing Table - Numbering Plan (PGM 324)
