ISDN Service
131
SBX IP 320 Features & Operation Guide
To activate CLI Message Wait, use the following procedure:
1.
CLIP should be programmed as ON (1).
2.
The message contents will be shown on LCD.
To retrieve a CLI Message:
1.
Press the [CALLBK] button.
2.
The message contents (CLI number, date and time, the calling count from the same CLI)
will be shown on the LCD. According to admin date LCD display format, the DATE will
be display as MM/DD or DD/MM. TIME is always displayed in 24-hour mode.
To delete the current CLI Message and see the next one:
1.
Press the [CONF] button.
2.
The Station User can see the next CLI message and the current CLI message will be
deleted.
To delete all CLI messages:
1.
Press the [CALLBK] button.
2.
Press the [DND] button and [HOLD] button.
To initiate a call back:
1.
Press the [HOLD] button.
2.
The System will secure an available CO line in the first accessible CO group and dial it
similar to speed dialing.
To see the next or previous CLI message:
Press the [UP/DOWN] keys.
M S G : C L I ( # )
0 3 4 3 4 5 0 7 9 0 2
D AT E T I M E C N T x x
