DOC: 03-933001-01
DESC:
Assy, Basic Electrical, (120v Shown)
PAGE:
REV
3 of 23
1
PREPARED BY: Sax Makthepharack REVISED BY:
CONTROL: INDUSTRIAL ENGINEERING
REV. DATE:
SHOWN
-
07 - 18 - 00
Dave Maderos
1.
3900 GALILEO BASIC (ELECTRICAL) ASSEMBLY PROCEDURES
1.1
RUBBER FOOT/DOOR HINGE INSTALLATION
1.1.1
Place chassis assembly, 03-933010-01 upside down. Install 3 each 8-32 X 3/4" screws, 12-222008-12 into 3 each plastic foot,
03-925315-02 and secure one foot/screw assembly into each front corner of chassis and one foot/screw assembly into the back left corner
of chassis as shown.
1.1.2
Install one each foot, R0-028000-84, one each washer, R0-028120-23 and one each Spacer, 03-933207-01 to right rear corner of chassis
using one each 8-32 X 3/4” Screw, 12-222008-12 as shown.
1.1.3
Install lower hinge bracket, 03-933181-01 using two each 8-32 X 3/8" screws, 12-901163-00 as shown.
1.1.4
Turn chassis upright and place Teflon washer, 14-999410-00 onto pin of lower hinge bracket 03-933181-01.
1.1.5
Install upper bracket, 03-933180-01 onto chassis using two each 8-32 X 1/4" screws, 12-901165-00 as shown.
Continue Next Page
