DOC: 03-933001-01
DESC:
Assy, Basic Electrical, (120v Shown)
PAGE:
REV
7 of 23
1
PREPARED BY: Sax Makthepharack REVISED BY:
CONTROL: INDUSTRIAL ENGINEERING
REV. DATE:
SHOWN
-
07 - 18 - 00
Dave Maderos
1.3
DOOR CATCH/RIGHT SIDE OVEN COVER INSTALLATION
1.3.1
Secure door catch, 03-933158-01 to chassis using two each 8-32 X 1/4" screws, 12-901165-00 as shown.
1.3.2
Place one (thin) .25 thk Transferline Gasket (03-933205-02) over stud mount with large hole on the Right Side Oven Cover. Place an other
(thick) .37 thk Transferline Gasket (03-933205-03) over previous gasket as shown.
1.3.3
Using a 3/16" nut driver, secure magnetic switch to the studs on the right side oven cover, 03-933174-01 using two each 4-40 X 1/4" hex
standoffs, R0-028000-55.
1.3.4
Secure right side oven cover, 03-933174-02 to chassis using four each 8-32 X 5/16" truss screws, 12-902733-00. One in each corner of
panel as shown. Door Catch should pass through slot in front flange of right side cover. Check alignment of cover. Door catch should not
drag against top or bottom of slot when flexed.
Continue Next Page
