DOC: 03-933014-01
DESC: Assy, Heater, 101V, 120V & 230V
PAGE:
REV
4 of 4
1
PREPARED BY: Sax Makthepharack REVISED BY:
CONTROL: INDUSTRIAL ENGINEERING
REV. DATE:
SHOWN
-
06 - 14 - 00
Dave Maderos
1.
3900 GALILEO, 101V, 120V & 230V HEATER ASSEMBLY PROCEDURES
1.1
OPERATION IN SEQUENCE
1.1.1
Build the appropriate heater element assembly, 03-933005-0X as detailed on drawing.
1.1.2
Insert one each 6-32 x 3/8" screw, 12-222006-06 with one each #6 flat washer, 14-122006-00 through one heater coil eyelet
and one lug of heater harness, 03-933506-01. Tightly secure with one each 6-32 Kep nut, 13-312006-00 using a 5/16" nut
driver and Phillips screw driver. Repeat this process for the other side of heater coil.
1.1.3
Position the remaining threads of the two each 6-32 X 3/8" screws through the mica heater element support ring and secure
(FINGER TIGHT) using two each ceramic standoffs, 24-811803-00. Obtain two more ceramic standoffs and secure to heater
element support ring using two each 6-32 X 3/16" screws, 12-222006-03 as shown.
1.1.4
Install heater element support ring assembly to inner over baffle, 03-933150-01 using four each #6 split lock washers,
14-202006-00 and four each 6-32 X 3/16" screws, 12-222006-03 as shown.
ASSEMBLY DETAIL (REF.)
